INFLATABLE MATTRESS SLEEP

Just bought an inflatable mattress for use at home, in the countryside or at the campsite. Please read the following instructions carefully.

INSTRUCTIONS FOR USE - MAINTENANCE & REPAIR

>>Open and inflate the mattress in a place where the temperature is not lower than -15 C, after all inflatables are sensitive to cold.

>>Select as the flattest surface possible, free of any sharp objects that may damage the mattress.

>>To better protect the lower surface of the mattress is recommended to use a protective floor while protecting the top surface is recommended to use the sheet to cover

>>Avoid free report of the mattress in the sun. (Leave slightly deflated, the mattress to be more comfortable, but also to avoid possible damage to the seams of the pressure change of indoor air).

>>Do not strain or stretch the layer and generally do not inflate by mouth.

>>Do not use an air compressor to inflate the mattress. Prefer pumps foot or hand.

>>It is advisable to check the pressure of the mattress periodically, especially if you are going to sleep in this two people simultaneously.

>>Always store your mattress deflated, dry, carefully folded in properly ventilated area, free from moisture or dust.

>>Clean gently with your soft damp cloth layer when necessary. Do not use chemicals or harsh detergents that can cause damage to materials. Tighten the valve to prevent possible water leakage inside the balloon.

>>Do not walk or jumping on the mattress. It can cause damage to the seams.

>>Improper use of this product eliminates any warranty.

>>Small holes or tears can be repaired using the repair kit included in the box of the product, follow the instructions below:

For small holes:

>>Unscrew the valve and deflate the mattress.

>>Close the valve.

>>Put some glue by means of a toothpick onto the small hole and repeat the process.

>>Do not use the mattress for at least 5 hours. Then inflate, always following the existing directives.

For larger holes or tears:

>>Unscrew the valve and deflate the mattress.

>>Close the valve.

>>You cut the patch to the desired dimension and always in a circular or oval shape.

>>Apply the adhesive to the surface to be repaired.

>>Apply the patch and release, with a weight from above, for about 10 hours.

>>Then inflate the mattress always following these instructions.