Δωρεάν μεταφορικά στην Ελλάδα για αγορές άνω των 50€ & έως 3kg/δέμα

Raumer Hang Fix Inox M12C Ø12x74mm

6,00 
(συμπεριλαμβάνεται ΦΠΑ)

R109
Σε απόθεμα
+
Έκπτωση ποσότητας :
Ποσότητα 10+
Τιμή 5,40 €

Raumer Hang Fix Inox M12C Ø12x74mm

Description

Stainless steel AISI 316L bolt, ideal for use in climbing and mountaineering anchors.
Requires hard compact rock (limestone, dolomite).Do not use on soft rocks (such as sandstone) or too hard (such as quartzite, granite).
Short Type bolt (diam. M12x74 mm).
 
New type

The expanding collar is a new design and has greatly improved on the previous version.
The design phase focused on creating a technology which ensures expansion on an increased number of surfaces.
Our tests show that this objective has been achieved.
Attention: On particularly soft rocks (such as sandstone) all expansion bolts - including our own - are not recommended due to the unreliable nature of the supporting material.
In these circumstances we recommend the use of fixed resin anchors (epoxy glue resin) or Multi-Monti screw anchors.
 
Technical Specifications
The majority of our anchors are made with stainless steel AISI 316L, which offers a higher resistance to marine corrosion than the former AISI 304.
To highlight this difference each article is stamped with the relevant symbols.
However, bolts have not been branded as once in place, the symbols would be invisible, Instead, a small circular collar has been added (see photo above) to mark the difference between the two metals.
This allows verification of the type of bolt used at any time.
There is also a “Marina” version of this anchor which is highly resistant to saline corrosion.
To mark the difference between stainless steel AISI 316L and the marina version of the same material, all marine-suitable anchors have been marked with a fish symbol and the initials “INOX".
Note: As mentioned above, this branding is not used on bolts.
In order to differentiate the marine version, as well as the afore-mentioned collar there is a small engraved dimple which allows for accurate identification once the bolt is in place. (See photo above).

MARINA version: Art. Art.109M
 
References
Extraction R =  24 Kn                    
Radial R = 30 Kn
Weight = 80 gr

Εταιρεία
:
Raumer
See More products
Web Offer 10%
PR AT017-330
27,60  24,80 
(συμπεριλαμβάνεται ΦΠΑ)
FX V00210
2,20 
(συμπεριλαμβάνεται ΦΠΑ)
FX V00212
2,20 
(συμπεριλαμβάνεται ΦΠΑ)
Ανοξείδωτες Βίδες M8 X 20 σετ 10τεμ.
Web Offer 10%
CDC 49
10,20  9,20 
(συμπεριλαμβάνεται ΦΠΑ)