McNett Tenacious Tape
Use Tenacious Tape™ to patch up and repair all sorts of outdoor gear. Make in-field repairs on tents, tarps, rain gear, fishing gear and more. With super-aggressive stick and clean adhesive technology Tenacious Tape takes duct tape to the mat.
- Super-aggressive adhesive for long lasting repairs
- Clean adhesive technology – leaves no sticky, ugly residue
- Made from the same fabric as high-quality tents
- Lightweight and compact – easy to carry in the field
- Clear, nearly invisible adhesive
A combiniation of real tent fabric and high-strength adhesive, Tenacious Tape makes fast, permanent repairs. Clean adhesive technology allows Tenacious Tape to be removed without leaving duct tape’s ugly gluey mess. Works on nylon, vinyl, netting, plastic, and breathable fabrics.
Tenacious Tape can be used in conjunction with Seam Grip™ and other urethane adhesives for ultra strong repairs. Includes one 3″ x 20″ (50cm x 7.5cm) strip of tape, 60 sq. inches (375 sq. cm).
Clean and dry area to be repaired. Trim loose threads. Join torn edges of material.
For smaller repairs, cut tape for appropriate size, allowing overlap of repair of at least 1 inch (25mm) in all directions.
Round the edges of tape for best adhesion.
Remove paper backing and apply to damaged area over hard, flat surface. May be applied to outside surface or inside surface depending upon cosmetic preference, or both sides for the highest performance repair.
After applying, rub with pressure using circular motion from center out. Item may be used immediately. Adhesive reaches full strength in 24 hours.
If more permanent repairs are desired. Tenacious Tape can be used with Seam Grip® or Aquaseal® Urethane Adhesives. If used in this manner, follow adhesive application instructions and overlap the adhesive with Tenacious Tape by at least 1 inch (25mm).
Once adhesive is fully cured, the tape may be removed if desired.
Store unused portion of tape in sealed plastic bag.
Tenacious Tape is washable. Do not dry clean.
No posts found