211 0113137 & 2114117877
Petzl Stef Tilting Device For Nest Litter Before 2020
Tilting device for NEST litter before 2020
Tilting device for NEST litter
Petzl Rad Line 6mm 60m
Ultra-light and compact hyperstatic cord, designed for skiers doing crevasse rescue, rappelling or roping up on a glacier to traverse a crevasse zone.
Petzl Rad Line 6mm 30m
Petzl Laser Speed Light
Ultra-lightweight ice screw with integrated crank
Petzl Laser Speed 10cm
Ultra-high-performance progression ice screw, with integrated crank
Petzl Laser Speed
Ultra-high-performance ice screw with integrated crank
Petzl Laser
Lightweight, performance ice screw
Petzl Ζώνη Fly
Ultra-lightweight, modular technical mountaineering/ski harness, dons with feet on the ground
Petzl Am’D Pin Lock
Asymmetrical aluminum carabiner, unlocks with a tool
The Am'D PIN-LOCK asymmetrical aluminum carabiner is designed for use with groups. It secures the connection of the user thanks to its PIN-LOCK system, which can only be opened by the operator with a specific unlocking tool. Am'D PIN-LOCK can be connected to the CAPTIV bar to favor positioning of the carabiner along the major axis, to limit the risk of it flipping and to keep it integrated with the device.
Petzl Djinn Axess 12cm Violet
Durable quickdraw for rock climbing
Reliable and durable, the DJINN AXESS quickdraw is especially suited for rock climbing. DJINN carabiners have a wide rope contact zone to limit rope drag and provide greater durability for both carabiner and rope. The design of the bent gate allows the rope to be clipped efficiently. The Keylock system prevents the carabiner from snagging when clipping and unclipping. Available in two lengths and two colors.
Petzl Coeur Steel 10mm Pack of 20
Standard steel hanger for interior uses or non-permanent installations (pack of 20)
Standard steel hanger designed for interior uses or non-permanent installations. It is available for 10 or 12 mm diameter bolts.
Petzl Φακός Κεφαλής Iko Core 500 Lumens IPX4
Lightweight rechargeable headlamp with multi-beam and AIRFIT headband. 500 lumens
The rechargeable IKO CORE headlamp combines multiple technologies to offer 500 lumens at only 79 g. Featuring an AIRFIT headband, an ultra-thin lamp body and an energy source worn in the rear, the headlamp is balanced and comfortable enough to be imperceptible. The multiple LEDs are ideally distributed to provide uniform lighting, for optimal visual comfort. Thanks to its HYBRID CONCEPT design, IKO CORE comes with the CORE rechargeable battery and is also compatible with three AAA/LR03 batteries (not included). It is versatile: can also be worn around the neck, or transformed into a lantern, using the storage pouch. It can be flattened to reduce bulk, making it practical for all outdoor activities.
Petzl Asap'Sorber Axess 40cm
Energy absorber for ASAP or ASAP LOCK for a maximum load of 250 kg
Petzl Absorbica I Lanyard with Connectors 150cm ANSI
Petzl ABSORBICA-I International version - Single lanyard with integrated energy absorber and captive carabiners
Petzl Easytop Wall
The Petzl Easytop Wall is the complete all in one anchor system.
The Easytop is extremely durable thanks to it’s steel frame, the reliable locking system and the structures protective shell.
Installation is simple and compatible with most climbing walls. Inspection for wear and function is also simple using the inspection pin, included and each unit is individually identified.
Petzl Easytop Carabiner
The Petzl Easytop Carabiner
The Easytop Carabiner is used as the top anchor on the Easytop wall but can be installed on existing anchor systems with a quick link, not included. Inspection for wear and function is also simple using the inspection pin, included and each unit is individually identified.
Petzl Bm'D Triact Lock
Lightweight asymmetrical high-strength carabiner
The Bm’D lightweight asymmetrical carabiner is made of aluminum. It has a D shape particularly suited for connection to diverse equipment such as descenders or positioning lanyards. Its fluid interior design and Keylock system facilitate handling. The Bm’D carabiner has the TRIACT-LOCK automatic locking system. The sleeve is reinforced for greater front and lateral gate strength. Bm'D may be used with a CAPTIV positioning bar to favor loading of the carabiner along the major axis, to limit the risk of it flipping and to keep it integrated with the device.
Petzl Seat For Volt® Harnesses
Seat for VOLT harnesses for greater comfort during suspension
The seat for the VOLT harness attaches to the designated slots on the harness. It provides additional comfort during prolonged suspension.
Petzl Astro Bod Fast International Version Black
With an integrated CROLL L ventral rope clamp, the ASTRO BOD FAST harness is designed for greater efficiency and comfort during rope ascents. The gated ventral attachment point allows optimal integration of equipment
Petzl Asap' Sorber 40cm
Energy absorber for ASAP or ASAP LOCK
The ASAP’SORBER energy absorber may only be used with an ASAP or ASAP LOCK mobile fall arrester. It allows user to work at a distance from the rope, in order to protect it during certain work phases. Equipped with tear-webbing inside a pouch that opens on each end, the absorber is protected from abrasion, while allowing for regular inspection. It is available in two lengths, to provide the best balance between distance from the rope and reduced fall length.
Petzl Attachment Bridge For Sequoia And Sequoia SRT Harnesses
Attachment bridge for Sequoia and Sequoia SRT harnesses
Attachment bridge for connection to the two gated attachment points of the Sequoia and Sequoia SRT arborist seat harnesses, to optimize lateral mobility.
Petzl Harness Canyon Guide
Comfortable, ergonomic harness with integrated protective seat, for canyoning
Designed for canyoning, the CANYON GUIDE is a comfortable, ergonomic harness designed for expert users and guides. It features a gated ventral attachment point that allows optimal integration of equipment (lanyard, ascender, cutaway sling). The gear loops and secondary loops make it easy to carry gear in any situation (progressing, organizing packs, rescue...). The protective seat is durable and interchangeable, and effectively protects the wetsuit and harness webbing from abrasion. The stainless steel DOUBLEBACK buckles, the metal attachment point and the reinforced gear loops optimize durability, for intensive use. The harness’s identification panel is also reinforced, for tracking the harness throughout its lifespan.
Petzl Harness Canyon Club
Easy-to-use harness with integrated protective seat, for canyoning
Designed for canyoning, the CANYON CLUB is an easy-to-use harness for groups. It is easy to put on and adjust, and has a single attachment point, making it easy for the guide to equip a group. The protective seat is durable and interchangeable, and effectively protects the wetsuit and harness webbing from abrasion. The attachment point and gear loops are reinforced for excellent durability, even during intensive use. The harness's identification panel is also reinforced, for tracking the harness throughout its lifespan. Numerous accessories (protective seats in different colors, removable foam and equipment holders) are available for personalizing equipment and improving comfort, depending on need.
Petzl Avao® Bod Fast International Version
Comfortable harness for fall arrest, work positioning and suspension
Petzl Ζώνη Volt® Wind International Version
Fall arrest and work positioning harness for the wind power industry
Petzl Jag System 5m
The JAG SYSTEM haul kit for pickoffs, making a releasable anchor, or tensioning a system, thanks to its 4:1 mechanical advantage and excellent efficiency (sheaves with sealed ball bearings). The collapsed kit is highly compact, allowing it to be used even when the distance to the anchor is very short. The JAG SYSTEM haul kit is quick and easy to deploy: it is ready to use thanks to the flexible cover that prevents any risk of tangling. The haul end is color-coded for instant identification. It is available in three lengths: 1, 2 and 5 meters.
Petzl Jag System 2m
The JAG SYSTEM haul kit for pickoffs, making a releasable anchor, or tensioning a system, thanks to its 4:1 mechanical advantage and excellent efficiency (sheaves with sealed ball bearings).
Petzl Jag System 1m
Petzl Φακός κεφαλής Tactikka® + 350 Lumens IPX4
Compact and powerful headlamp, ideal for hunting and fishing. White or red lighting to preserve night vision and ensure stealth. 350 lumens
Petzl Shackles
Shackles for connecting a seat (pack of 2)
Petzl Ανταλλακτικό Σχοινί Για Grillon Hook 3m European Version
Petzl Kab Rope Bag
Rope bag for gym climbing
The KAB rope bag is designed for gym climbing with an urban aesthetic. The bag features a removable rope tarp. Two distinct compartments allow the user to separate climbing equipment from other items. Thanks to its gusseted design, the volume quickly adjusts from 20 to 26 liters carrying the essential gear required for a gym session: rope, harness, shoes, belay device, chalkbag... The reinforced, adjustable shoulder strap ensures comfort.
Petzl ASTRO® SIT FAST
Ultra-comfortable rope access seat harness
The ASTRO SIT FAST rope access seat harness features a gated ventral attachment point that allows optimal integration of equipment (rope clamp, lanyard, seat...). Wide, semi-rigid waistbelt and leg loops give excellent support. They are contoured and lined with breathable foam padding for comfort when suspended. The harness also facilitates the carrying and organizing of work tools, with multiple equipment loops and retainers for attaching CARITOOL tool holders and TOOLBAG tool-holder pouches. This seat harness is designed to be converted into a full harness when combined with a TOP CROLL S or L chest harness. The ASTRO SIT FAST features leg loops with FAST LT automatic buckles.
Petzl Seat For Sequoia And Sequoia Srt Harnesses
Wide seat for a comfortable working position during suspension. It has an adjustable width to reduce bulk and facilitate movement within the tree. It connects to the two gated points on the SEQUOIA and SEQUOIA SRT arborist seat harnesses, using the two shackles.
Petzl Ανταλλακτικό Σχοινί Για Grillon Plus 3m
Replacement rope for GRILLON PLUS.
Petzl Ανταλλακτικό Σχοινί Για Grillon Plus 2m
Petzl Spelegyca
Asymmetric double lanyard for caving
Lanyard designed to help pass intermediate anchors when caving.
Petzl Auxiliary Closed Brake For I'D®
Auxiliary closed brake for I'D S, I'D L and I'D EVAC self-braking descenders
The auxiliary closed brake is designed for I'D self-braking descenders. It increases the friction as required for the load weight and the rope diameter and provides a constant redirect of the rope.
Petzl Auxiliary Open Brake For I'D®
Auxiliary open brake for I'D S, I'D L and I'D EVAC self-braking descenders
The auxiliary open brake is designed for I'D self-braking descenders. It may be used to increase the friction in accordance with the weight of the load and the diameter of the rope, or to release the rope at any time.
Petzl Swift RL Pro 900 Lumens IPX4
Ultra-powerful, lightweight rechargeable headlamp with multi-beam and REACTIVE LIGHTING® technology, for proximity and distance vision. White lighting, or red to ensure nighttime stealth. 900 lumens
Designed for the workshop, small maintenance jobs, or concerts and shows, the SWIFT RL PRO rechargeable headlamp offers 900-lumen brightness. With REACTIVE LIGHTING® technology, a sensor analyzes the ambient light and automatically adjusts headlamp brightness to user requirements. It also has red lighting to ensure stealth. SWIFT RL PRO is intuitive, with a single button for easy control over all lamp functions. The five-level gauge allows precise monitoring of the battery charge level. The lamp is compatible with Petzl helmets, and mounting accessories allow it to be attached to any kind of helmet.
Petzl Vizen Mesh
Face shield for tree care for VERTEX and STRATO helmets, with EASYCLIP system
The VIZEN MESH face shield protects against flying wood chips and shavings. This full-coverage shield offers complete face protection while ensuring good visibility. It is easily installed on VERTEX and STRATO helmets, thanks to the EASYCLIP attachment system.
Petzl Progress Adjust-I Positioning Lanyard 5m
Adjustable positioning lanyard
When combined with a fall-arrest device, the PROGRESS ADJUST-I adjustable positioning lanyard enables comfortable positioning at a workstation when the user has support for the feet. Thanks to the ADJUST rope adjuster, the length can be quickly and easily adjusted. The CAPTIV ADJUST and STUART accessories help hold the connectors in a good position for easy clipping. Depending on the configuration, it can be used in single or double mode. The PROGRESS ADJUST-I positioning lanyard is available in three lengths (2, 3 and 5 m).
Petzl Progress Adjust-I Positioning Lanyard 3m
Petzl Progress Adjust-I Positioning Lanyard 2m
Petzl Absorbica-Y Tie-Back MGO - Bm'D
Double lanyard with integrated intermediate tie-back rings and energy absorber
The ABSORBICA-Y TIE-BACK is a double lanyard with integrated intermediate tie-back rings and compact energy absorber. It is designed for vertical progression on very large structures and when passing intermediate anchor points. The TIE-BACK system allows the lanyard ends to be reconnected to fit around structures with a very large cross section. The arms are elasticized to avoid hindering progression. It is available with or without connectors and is certified to North American, European and Russian standards
Petzl Absorbica-Y Tie Back Without Connector
The ABSORBICA-Y TIE-BACK is a double lanyard with integrated intermediate tie-back rings and compact energy absorber. It is designed for vertical progression on very large structures and when passing intermediate anchor points. The TIE-BACK system allows the lanyard ends to be reconnected to fit around structures with a very large cross section. The arms are elasticized to avoid hindering progression. It is available with or without connectors and is certified to North American, European and Russian standards.
Petzl Progress Adjust-I Progression Lanyard 1m
Single adjustable progression lanyard
PROGRESS ADJUST-I is a single adjustable progression lanyard that allows, when combined with another lanyard, continuous connection for all types of progression (rope ascent, moving along a traverse line...). Thanks to the ADJUST rope adjuster, the length can be quickly and easily adjusted. Reversible, the ADJUST rope adjuster can be placed on the anchor or on the harness ventral attachment point. The CAPTIV ADJUST and STUART accessories help hold the connectors in a good position for easy clipping.
Petzl Absorbica-Y MGO 150cm International Version
Double lanyard with integrated energy absorber and MGO connectors
ABSORBICA-Y MGO is a double lanyard with compact energy absorber, designed for progression on a vertical structure or a horizontal lifeline and when passing intermediate anchors. It is available in two lengths: 80 or 150 cm versions (without connectors). The 150 cm version has elasticized arms, to avoid hindering progression. Equipped with two large-opening MGO connectors and a Bm’D connector with a CAPTIV positioning bar, it is certified to American, European and Russian standards.
Petzl Freino Z Triact Lock
Carabiner with friction spur for descenders
The FREINO Z carabiner has a friction spur for adding or adjusting friction during the descent. It is easy to use and compatible with I’D S, I’D L, I’D EVAC and RIG self-braking descenders. When rotated, it makes the descender loss-proof when transferred from the equipment loop to the ventral attachment point or anchor. The FREINO Z has the TRIACT-LOCK automatic locking system.
Petzl Absorbica-Y MGO 80cm European Version
ABSORBICA-Y MGO is a double lanyard with compact energy absorber, designed for progression on a vertical structure or a horizontal lifeline and when passing intermediate anchors. It is available in two lengths: 80 or 150 cm versions (without connectors). The 150 cm version has elasticized arms, to avoid hindering progression. With two MGO large-opening connectors, it is certified to European and Russian standards.
Petzl Φορείο Nest
The NEST litter was developed in partnership with the French national caving rescue organization. It allows a victim to be transported horizontally, vertically or at an angle. It is easy to manipulate and simplifies installation of a victim. It is suitable for all technical rope rescue, particularly in confined spaces.
Petzl Headlamp Tactikka®+ RGB 350 Lumens IPX4
Compact headlamp with mixed beam for proximity and distance vision. White or red/green/blue lighting to ensure stealth. 350 lumens
Designed for the workshop, small maintenance jobs, or concerts and shows, the TACTIKKA + RGB offers 350-lumen brightness and a mixed beam, for comfortable proximity lighting and rapid movement. It also has red, green or blue lighting to ensure stealth. TACTIKKA +RGB comes with 3 standard batteries and is also compatible with the CORE rechargeable battery, thanks to the HYBRID CONCEPT design. Mounting accessories allow the lamp to be attached to any kind of helmet.
Petzl I’D Evac
Self-braking descender with anti-panic function for lowering from an anchor
The I’D EVAC self-braking descender is primarily designed for lowering from an anchor. The ergonomic handle is specifically oriented for managing a load from the anchor and offers comfortable descent control. The integrated anti-panic function and anti-error catch limit the risk of an accident due to user error. The AUTO-LOCK system allows the rope to be automatically locked without having to manipulate the handle or tie off the device. Once locked, the rope can be taken up without having to manipulate the handle. The safety gate allows the rope to be installed with the device remaining connected to the anchor. I’D EVAC is compatible with 10 to 11.5 mm ropes and allows handling of loads up to 250 kg.
Petzl Progress Adjust-Y
Double adjustable progression lanyard
PROGRESS ADJUST-Y is a double adjustable progression lanyard that enables continuous connection for all types of progression (rope ascent, moving along a traverse line...). Thanks to the ADJUST rope adjuster, the length of the adjustable arm can be quickly and easily adjusted. The TANGA accessory and the plastic sheath help hold the connectors in a good position for easy clipping.
Petzl Absorbica-Y 150cm
Double lanyard with integrated energy absorber
ABSORBICA-Y is a double lanyard with compact energy absorber, designed for progression on a vertical structure or a horizontal lifeline, and when passing intermediate anchors. It has several installation options on the harness and can be used with different types of connectors. It is available in two lengths: 80 or 150 cm versions (without connectors). The 150 cm version has elasticized arms, to avoid hindering progression. Depending on the connectors used, the ABSORBICA-Y is certified to American, European, and Russian standards.
Petzl Absorbica-Y 80cm
Petzl Absorbica-I Vario
Adjustable single lanyard with integrated energy absorber
ABSORBICA-I VARIO is an adjustable single lanyard with compact energy absorber designed for progression on a horizontal lifeline (rope or cable) or on an elevated platform, without passing intermediate anchors. It features the VARIO adjustment system, allowing the lanyard length to be adjusted in order to reduce the potential fall height. Depending on the connectors used, ABSORBICA-I VARIO is certified to North American, European and Russian standards.
Petzl Absorbica-I 150cm
Single lanyard with integrated energy absorber
ABSORBICA-I is a single lanyard with compact energy absorber designed for progression on a horizontal lifeline (rope or cable) or on an elevated platform, without passing intermediate anchors. It has several installation options on the harness and can be used with different types of connectors. It is available in two lengths: 80 or 150 cm versions (without connectors). The 150 cm version has an elasticized arm, to avoid hindering progression. Depending on the connectors used, ABSORBICA-I is certified to American, European and Russian standards.
Petzl Absorbica-I 80cm
Petzl Absorbica
Long linking bar for asymmetric boots
Replacement linking bar for boots with very assymmetric footprint, enabling solid boot/crampon interface.Adjustable to the half size.
Petzl Djinn Axess 17cm Blue
Petzl Djinn Axess 12cm Blue
Petzl Grillon Mgo 3m Σταθεροποιητής Θέσης Εργασίας
Adjustable work positioning lanyard with MGO connector
The GRILLON MGO lanyard is used to make work positioning systems, to complement a fall-arrest system. Its length can be very easily and precisely adjusted as necessary for comfortable positioning at the work station. Connector with very large gate opening is ideal for connection to metal structures or to large-diameter cables and bars. GRILLON MGO is available in two lengths: 2 and 3 m, and is certified to North American and European standards.
Petzl Grillon Mgo 2m Σταθεροποιητής Θέσης Εργασίας
Petzl Semi Static Rope Orange Control 12.5mm 60m
Low stretch kernmantel, high-strength rope with excellent handling, for tree care
Petzl Semi Static Rope Orange Control 12.5mm 45m
The CONTROL 12.5 mm low stretch kernmantel rope is designed for tree care. The large diameter ensures high strength and excellent grip. The EverFlex technology guarantees great flexibility and handling over time. It comes with a splice at one end for optimal rope glide through devices like a friction saver or pulley, and through tree branches. The small size of the splice allows it to pass through the friction chain of the ZIGZAG and ZIGZAG PLUS mechanical Prusiks. Rope available in two colors and three lengths.
Petzl Semi Static Rope Orange Control 12.5mm 35m
Petzl Semi Static Rope Green Control 12.5mm 60m
Petzl Semi Static Rope Green Control 12.5mm 45m
Petzl Semi Static Rope Green Control 12.5mm 35m
Petzl Semi Static Rope Green Flow 11.6mm 60m
Flexible and lightweight low stretch kernmantel rope, for tree care
Petzl Semi Static Rope Orange Flow 11.6mm 60m
The FLOW 11.6 mm low stretch kernmantel rope is designed for tree care. The small diameter ensures very good performance in terms of flexibility and weight. It has low stretch when loaded, increasing efficiency when moving through the tree. The EverFlex technology guarantees great flexibility and handling over time. It comes with a splice at one end for optimal rope glide through devices like a friction saver or pulley, and through tree branches. The small size of the splice allows it to pass through the friction chain of the ZIGZAG and ZIGZAG PLUS mechanical Prusiks. Rope available in two colors and three lengths.
Petzl Semi Static Rope Orange Flow 11.6mm 45m
Petzl Semi Static Rope Orange Flow 11.6mm 35m
The FLOW 11.6 mm low stretch kernmantel rope is designed for tree care. The small diameter ensures very good performance in terms of flexibility and weight.
Petzl Semi Static Rope Green Flow 11.6mm 35m
Petzl MGO OPEN 110
Auto-locking directional connector with large gate opening, and a gated connection point.
MGO OPEN is an auto-locking directional connector with a large gate opening for connection to metal structures or to large-diameter cables and bars. It has a gated connection point for attachment to different types of lanyards. If the lanyard is damaged, the connector can thus be reused. MGO OPEN is available in two versions.
Petzl Maestro L 2020
MAESTRO L is a descender designed for technical rescue operations. It facilitates manipulation of heavy loads, for lowering or hauling, and may be used in both the primary system or in a back-up belay. This versatility allows rescuers to adapt to any situation they may encounter on the rescue scene. The ergonomic handle and integrated brake allow for comfortably controlled descent. Shifting from lowering position to hauling position is immediate, without the need to transfer the load. The integrated progress-capture pulley has a large diameter sheave mounted on sealed ball bearings, ensuring excellent hauling efficiency. The AUTO-LOCK system automatically locks the rope when the handle is not in use. Once locked, the rope can be taken up without having to manipulate the handle. The MAESTRO L descender is compatible with 12.5 to 13 mm ropes and allows handling of loads up to 280 kg.
Petzl Maestro S / 2020
Descender with integrated progress-capture pulley for loads up to 250 kg, compatible with 10.5 to 11.5 mm ropes