211 0113137 & 2114117877
Protekt Vertical Fall Arrest System
The AC 360 have been modyfied accordingto the newest version EN 353-1:2014 standard.The system meets the requirements of EuropeanParliament Regulation 2016/425
Protekt Guided type fall arrester
AC 012 guided type fall arrester intended for use with the AC 100 14mm dia. work rope. The device's parameters enable direct connection to a full body harness – with no micro shock dissipater required.
Protekt Webbing sling Connector 80cm
Webbing sling AZ 910 is:
• a component of fall protection equipment – when combined with an energy absorber (e.g. ABM) forms connecting and absorbing device complying with EN 354.• lan EN354 safety cable – one of the webbing sling latches should be attached to the fixed structure point / cable hitch / scissor hitch. Connect the other end of the hitch to the safety shock absorber by means of a second latch / by moving one end of the hitch through the other. The resulting connecting and cushioning component is connected directly to the front or rear buckle of the safety harness.
• sprzęt aplinistyczny EN566.
Protekt Tool Lanyard 1,3M
Elastic tool lanyard with carabiner. Protection against dropping of tools, e.g. assembly wrenches.
Protekt Webbing sling Connector 200cm
Protekt Webbing sling Connector 150cm
Protekt Anchor Line 1.5m
Description
Connecting lanyard AT 191 is a component of personal fall protection equipment. The anchor point should be used as a portable temporary anchor device type B, enabling connection of connecting and absorbing device to a structural anchor point. Connecting lanyard is formed by stainless steel cable, 8mm dia and 0.6 to 10m long, fitted with loops of various diameters at both ends, enabling for looping without using any additional connectors.
Protekt Webbing sling Connector 120cm
Protekt Anchor Line 2m
Connecting lanyard AT191 is a component of personal fall protection equipment. The anchor point should be used as a portable temporary anchor device type B, enabling connection of connecting and absorbing device to a structural anchor point. Connecting lanyard is formed by stainless steel cable, 8mm dia and 0.6 to 10m long, fitted with loops of various diameters at both ends, enabling for looping without using any additional connectors.
Protekt Anchor Line 1m
Protekt ATRA 10 Industrial Safety Helmet Electrically Insulated Yellow
The ATRA 10 helmet has been designed to protect the user's head against falling objects. It is characterized by high strength, low weight and a wide adjustment range.