TRAC GUIDE is a trolley designed for adventure parks. Featuring an ergonomic captive carabiner, it allows the guide to quickly install the trolley on the cable with one hand. Because the carabiner pivots, the trolley remains in position on the cable when it makes contact with the end brake of the zip line. The ends are equipped with protective impact surfaces to reduce the risk of pinched fingers, and two connector support grooves to help avoid abrasion from the cable.

Openable even when attached to the anchor, the SPIN L2 is a double pulley designed for maximum simplicity when setting up hauling systems or tyroleans. The two parallel-mounted sheaves and auxiliary attachment point allow the pulley to be used for setting up various types of complex haul systems The large diameter sheaves mounted on sealed ball bearings provide excellent efficiency The swivel facilitates handling, allowing the pulley to be oriented under load, and direct connection of carabiners, ropes or slings.

Openable even when attached to the anchor, the SPIN L2 is a double pulley designed for maximum simplicity when setting up hauling systems or tyroleans. The two parallel-mounted sheaves and auxiliary attachment point allow the pulley to be used for setting up various types of complex haul systems The large diameter sheaves mounted on sealed ball bearings provide excellent efficiency The swivel facilitates handling, allowing the pulley to be oriented under load, and direct connection of carabiners, ropes or slings.

Openable even when attached to the anchor, the SPIN L1 pulley is designed for maximum simplicity in setting up hauling or load deviation systems, and tyroleans. The large diameter sheave mounted on sealed ball bearings gives it excellent efficiency. The swivel facilitates handling, allowing the pulley to be oriented under load, and direct connection of carabiners, ropes or slings.

Openable even when attached to the anchor, the SPIN L1 pulley is designed for maximum simplicity in setting up hauling or load deviation systems, and tyroleans. The large diameter sheave mounted on sealed ball bearings gives it excellent efficiency. The swivel facilitates handling, allowing the pulley to be oriented under load, and direct connection of carabiners, ropes or slings.

LINER is a breathable cap for wicking perspiration and drying quickly. The seamless fitted design makes it comfortable to wear under a helmet, without getting in the way.

The adjustable FOOTCORD foot loop is used with the ASCENSION handled ascender for rope ascents. Its 100 % Dyneema® construction increases durability.

A compromise between a classic mountaineering ice axe and an ice climbing axe, the SUM’TEC is a versatile, lightweight, technical ice axe. It is easy to use in piolet-canne mode with its stainless steel spike and its slightly curved shaft. In piolet-traction, the ALPIX pick (forged into banana shape) and the new TRIGREST hand rest (adjustable without tools) ensure the efficiency required for technical passages, as well as bergschrunds, ice gullies... Available in adze or hammer versions.

The SUM'TEC ice axe represents versatility: it adapts easily to any mountaineering activity, from classic to technical. It is completely modular, allowing it to be optimized for the objective. The TRIGREST handrest, adjustable without tools, and the compatibility of the ice axe with most Petzl accessories (PUR'ICE and DRY picks, MASSELOTTES...) ensure the efficiency required for difficult sections.

Designed for classic mountaineering, the SUMMIT EVO ice axe is the tool of choice for all types of alpine trips. Lightweight and with a waterjet-formed tube, it offers a very comfortable grip under the head of the axe. The technical design of the curved shaft provides the necessary clearance on steep, icy terrain. The forged and well-balanced head provides very good anchoring qualities. The grip of the shaft makes it a precise and efficient ice axe.

Designed for classic mountaineering, the SUMMIT ice axe offers an excellent balance between price and performance. It is lightweight and offers good anchoring performance of both the head and the spike; it is curved to offer necessary clearance for steep ice; it can be used in piolet-canne or piolet-rampe mode as well as in piolet-traction mode on short, steep sections.

The SUM'TEC ice axe represents versatility: it adapts easily to any mountaineering activity, from classic to technical. It is completely modular, allowing it to be optimized for the objective. The TRIGREST handrest, adjustable without tools, and the compatibility of the ice axe with most Petzl accessories (PUR'ICE and DRY picks, MASSELOTTES...) ensure the efficiency required for difficult sections.

Ultra-light and very compact, the RIDE ice axe gœs everywhere with you for ski touring or glacier travel, without weighing you down. Solid placements thanks to the all-steel head, a pick tapered to 3 mm and a bent shaft.

QUARK is a versatile ice axe designed for technical mountaineering and for ice climbing. Its balance and its ICE pick allow solid placements on any type of ice. The TRIGREST and GRIPREST handrests make it easy to handle and comfortable in any situation. They provide more efficient handle grip for difficult sections. Entirely modular, the QUARK ice axe adapts easily to technical, varied terrain: snow couloirs, gullies, north faces, icefalls... 

QUARK is a versatile ice axe designed for technical mountaineering and for ice climbing. Its balance and its ICE pick allow solid placements on any type of ice. The TRIGREST and GRIPREST handrests make it easy to handle and comfortable in any situation. They provide more efficient handle grip for difficult sections. Entirely modular, the QUARK ice axe adapts easily to technical, varied terrain: snow couloirs, gullies, north faces, icefalls...

Ultra-light at only 280 g, the GULLY ice axe is designed for technical mountaineering and steep skiing. Its tapered banana-shaped pick and the TRIGREST handrest (adjustable without a tool) ensure the performance required on technical sections.

Intended for children weighing less than 40 kg (88 lbs.), MACCHU is a seat harness designed for climbing. Its fully adjustable design, and optional BODY shoulder straps, enable this harness to adapt to both your growing child’s needs and climbing levels from top-roping through lead climbing. Identical to adult harnesses, the waistbelt and leg loops are padded to ensure comfort while suspended. The two DOUBLEBACK buckles maintain a uniform fit and position of both the tie-in points and gear loops as your child grows. The differentiated color of the belay loop allows a quick visual check to ensure the belay device is properly attached. The harness has two gear loops and an accessory loop for a chalk bag, to be just like the grown-ups.

Intended for children weighing less than 40 kg (88 lbs.), MACCHU is a seat harness designed for climbing. Its fully adjustable design, and optional BODY shoulder straps, enable this harness to adapt to both your growing child’s needs and climbing levels from top-roping through lead climbing. Identical to adult harnesses, the waistbelt and leg loops are padded to ensure comfort while suspended. The two DOUBLEBACK buckles maintain a uniform fit and position of both the tie-in points and gear loops as your child grows. The differentiated color of the belay loop allows a quick visual check to ensure the belay device is properly attached. The harness has two gear loops and an accessory loop for a chalk bag, to be just like the grown-ups.

The VERTIGO WIRE-LOCK PARK carabiner is designed for use on TRAC PLUS and TRAC pulleys and on progression lanyards. Its excellent grip and automatic WIRE-LOCK locking system, with Keylock, facilitate handling when passing intermediate anchors. The reinforced construction of the Keylock reduces the effect of vibrations, and the hard anodization provides greater resistance to damp and salty environments.

The VERTIGO WIRE-LOCK carabiner is designed for use on via ferrata lanyards. Its excellent handling and automatic locking system facilitate manipulations when passing intermediate anchors. The large opening and the Keylock system allow the carabiner to be easily connected to the cable. The WIRE-LOCK increases the lifetime of the product when used intensively, compared to classic locking systems.

The VERTEX VENT helmet is very comfortable, thanks to its six-point textile suspension and CENTERFIT and FLIP&FIT systems, which guarantee that the helmet fits securely on the head. The adjustable-strength chinstrap makes it ideal for both work at height and on the ground. It has ventilation holes with sliding shutters to allow airflow through the helmet. With its potential for integration of a Petzl headlamp, hearing protection, and multiple accessories, it is an entirely modular helmet, thus responding to the specific additional needs of professionals. The high visibility version features a fluorescent outer shell with phosphorescent clips and reflective bands, for optimal visibility of the worker, day or night.

The SIROCCO is designed to respond to the needs of climbers and mountaineers for reduced weight and for protection. Its head-covering shape, lower in the rear, offers reinforced protection over the entire head. Optimized volume on the head, along with excellent ventilation, provides maximum comfort.