Protekt

Protekt Ιμάντας 50cm Μαύρος

The AZ 900 webbing sling comprises:• an EN795 coupling element — wrap the sling around the element of a fixed structure, fasten the ends of the webbing sling with an oval latch. Attach a connecting-cushioning component to the oval latch. • an EN354 safety cable – one of the webbing sling latches should be attached to the fixed structure point / cable hitch / scissor hitch. Connect the other end of the hitch to the safety shock absorber by means of a second latch / by moving one end of the hitch through the other. The resulting connecting and cushioning component is connected directly to the front or rear buckle of the safety harness.

Protekt Universal Tripod Bracket UTB

The universal tripod bracket (UTB) can be attached to all tripods in the Protekt range.
It is compatible with the following winches:RUP502-U / RUP503-U / RUP504 / RUP505-U / RUP506.
Installation of the CRW200 using an additional PAD100-310 bracket
and CRW300 using an additional PAD100-320 bracket.

Protekt Half Rescue Stretcher DX 021

The DX 021 stretcher is designed for specialized rescue purposes.Half stretcher can be pulled on almost any type of surface.The DX 021 can also be used as a substitute means of transport for heavy equipment.It is perfect as a water rescue system.The set's usability makes it one of the most universal transport systems.Thanks to its special design, it enables adjustment of the stretcher's width and length to the size of the injured person.

Protekt Τρίποδο Lightweight Aluminum TM9-N

The lightweight aluminum safety tripod TM9-N is can anchor point compliant with the EN795/B and TS 16415/B norms and can be used as a component of fall protection equipment. The TM9-N tripod provides protection for up to 3 people simultaneously. The TM9-N tripod consists of a powder-coated steel head, equipped with 3 ball-bearing polyamide rollers for guiding the work rope of RUP and CRW series devices. The head is also equipped with 3 anchor points located on the sides of the head. Each of these points can be used as an anchor point for fall protection equipment. One such point can only be used by 1 user at a time.

Protekt Βίντσι Rup 502U 25

The RUP502-U lifting and lowering evacuation device is a rescue equipment component.Using the device, an injured person can be raised from a lower level to a higher level or lowered from a higher level to a lower level.The descent distance must not exceed 2 meters.

Winch equipped with automatic friction brake.

Protekt Τρίποδο TM15

The lightweight TM15 aluminium safety tripod is an anchor point according to EN795/B and TS16415/B and can be used as a fall protection equipment.

Protekt Vertical Fall Arrest System

The AC 360 have been modyfied according
to the newest version EN 353-1:2014 standard.
The system meets the requirements of European
Parliament Regulation 2016/425

Protekt Guided type fall arrester

AC 012 guided type fall arrester intended for use with the AC 100 14mm dia. work rope. The device's parameters enable direct connection to a full body harness – with no micro shock dissipater required.

Protekt Webbing sling Connector 80cm

Webbing sling AZ 910 is:

• a component of fall protection equipment – when combined with an energy absorber (e.g. ABM) forms connecting and absorbing device complying with EN 354.• lan EN354 safety cable – one of the webbing sling latches should be attached to the fixed structure point / cable hitch / scissor hitch. Connect the other end of the hitch to the safety shock absorber by means of a second latch / by moving one end of the hitch through the other. The resulting connecting and cushioning component is connected directly to the front or rear buckle of the safety harness.

• sprzęt aplinistyczny EN566.

Protekt Tool Lanyard 1,3M

Description

Protekt Webbing sling Connector 200cm

Webbing sling AZ 910 is:

• a component of fall protection equipment – when combined with an energy absorber (e.g. ABM) forms connecting and absorbing device complying with EN 354.• lan EN354 safety cable – one of the webbing sling latches should be attached to the fixed structure point / cable hitch / scissor hitch. Connect the other end of the hitch to the safety shock absorber by means of a second latch / by moving one end of the hitch through the other. The resulting connecting and cushioning component is connected directly to the front or rear buckle of the safety harness.

• sprzęt aplinistyczny EN566.

Protekt Webbing sling Connector 150cm

Webbing sling AZ 910 is:

• a component of fall protection equipment – when combined with an energy absorber (e.g. ABM) forms connecting and absorbing device complying with EN 354.• lan EN354 safety cable – one of the webbing sling latches should be attached to the fixed structure point / cable hitch / scissor hitch. Connect the other end of the hitch to the safety shock absorber by means of a second latch / by moving one end of the hitch through the other. The resulting connecting and cushioning component is connected directly to the front or rear buckle of the safety harness.

• sprzęt aplinistyczny EN566.

Protekt Anchor Line 1.5m

Description

Connecting lanyard AT 191 is a component of personal fall protection equipment. The anchor point should be used as a portable temporary anchor device type B, enabling connection of connecting and absorbing device to a structural anchor point. Connecting lanyard is formed by stainless steel cable, 8mm dia and 0.6 to 10m long, fitted with loops of various diameters at both ends, enabling for looping without using any additional connectors.