Kong

Kong Lecco 2.0 Stretcher

Evolution of a great classic, Lecco 2.0 is the new stretcher for mountain rescue that maintains the same versatility of the previous version with new features that make it even more versatile and efficient!

Kong Ortles Winch

TWO-SPEED WINCH

Kong Immobilization Mattress Vacuum 4

Vacuum mattress for patient immobilization.
Its dimensions fit LECCO, 911, Rolly and Kit Everest stretchers, keeping the patient immobilized even while in a vertical position.
There is no interference with X-rays nor MRI. 
The operating temperature ranges from +60 °C to -20 °C.
A maximum load of 150 kg is recommended.
The mattress is made with a double layer of PVC, guaranteeing maximum resistance to penetration, abrasion and tears, more durability and it's easy to repair.

Kong Grizzly

KONG GRIZZLY, used as a component of a retrieval system,  allows lifting and lowering of loads by positioning on the edge of a wall and avoiding the rubbing of the ropes against obstacles.

Kong 911 Armor

Lightweight aluminum alloy frame, thermoformed HDPE (High-Density Polyethylene) protective shell, offering excellent patient protection.
Easy to clean and disinfect thanks to removable inner padding.
Easily transportable by hand thanks to the tubular structure that runs around the perimeter, offering easy handling by multiple operators.
Suitable for helicopter transport (length just under 2m is compatible with most helicopter cabins).

Kong 911 Hive

Lightweight aluminum alloy frame, thermoformed HDPE (High-Density Polyethylene) protective shell, offering excellent patient protection.
Easy to clean and disinfect thanks to the removable inner padding.
Easily transportable by hand thanks to the tubular structure that runs around the perimeter, offering easy handling by multiple operators.
Suitable for helicopter transport (length just under 2m is compatible with most helicopter cabins).
Fitted with hanging kit ARIES #880070100KK
Can be divided into 2 pieces and easily loaded on the shoulders with the straps provided.

Kong Wrap

Back protection for Lecco/Lecco 2.0 stretchers made of a nylon shell that facilitates the transport on rough terrain in case it has to be dragged.
Equipped with removable skids and handles to facilitate sliding on snowy slopes.
Side handles for transport with multiple operators.

Kong 4D Pole

4D POLE is a "gin pole" of great value in handling loads or people, for both work and in organized technical rescue.

The pole can be fixed in multiple directions at the same time, allowing the loaded ropes to slide easily on the terminal pulleys.

Kong SRK Ski Rescue Kit

The SRK (Snow Rescue Kit) system allows to create an emergency stretcher on skis for those cases in which an organized rescue service cannot be used.

Kong Retractable Fall Arrester 15m

Retractable fall arrester with automatic recall with 4.5 mm steel cable.
15m version equipped with textile energy absorber for both horizontal and vertical use; other versions for vertical use only.
It allows the operator a high freedom of movement during work on scaffolding, trellises and metal structures.

Kong Ortles Stand

Rest plates for Ortles winch.
The two rest plates for the Ortles winch are made of folded aluminium alloy.
A number of holes of different diameter allows to fasten them to the ground by means of nails or the like

Kong Retractable Fall Arrester 10m

Retractable fall arrester with automatic recall with 4.5 mm steel cable available in three lengths (10m, 15m and 20m).
10m version equipped with textile energy absorber for both horizontal and vertical use; other versions for vertical use only.

Kong Retractable Fall Arrester 15m

Retractable fall arrester with automatic recall with 4.5 mm steel cable.
15m version equipped with textile energy absorber for both horizontal and vertical use; other versions for vertical use only.
It allows the operator a high freedom of movement during work on scaffolding, trellises and metal structures.

Kong Ark (Anti Rotation Kit)

System which prevents the rotation of Kit Everest in winching phases during helicopter rescue.
The system is composed of a cord diameter 4mm with total length of 100 meters (the last 10 meters are made of different colour), contained in a practical bag with “flap” for locking with the foot.
The lanyard is provided with a fuse with automatic release to protect the operator on the ground avoiding dangerous lifting.
The anti-rotation lanyard is directly connected to the stretcher to keep free the hands of the rescuer during the winching.
Upon reaching the cabin, the cord is released by the rescuer by pulling the special release system.

Kong Rope Bag For Convoy

Equipment bag fitted with pockets and compartments to hold your equipment in a practical and efficient way.

Kong Retractable Fall Arrester 6m

Retractable fall arrester with automatic recall for both horizontal and vertical use.
Polyester sling: width 25 mm, length 6 m.
External energy absorber with protective covering that can be opened for inspections.
Rotating anchor point at the top.
Twist-Lock connector equipped with anti-twisting swivel.

Kong Belt For Dogs Delphinus

Innovative floating harness designed by Ferruccio Pilenga, founder of SICS (Scuola Italiana Cani Salvataggio - Italian School of Rescue Dogs). 

Designed for rescue dogs and useful for all dogs that work in the water or on a boat.

Very quick to wear thanks to the long velcro that optimize the fit. 

Adjustable from the front under the dog's neck.

Safety straps with aluminum closures that allow use with a winch.

6 handles for handling the dog in the water and on-board boats.

Velcro for strobe light.

Kong high-strength aluminum ring for lifting.

Draining pocket with zip closure.

Great buoyancy aid. 2cm thick.

Kong Hanging Kit For Everest XL Version

Multiuse hanging kit made of two single pieces.

Kong Itaka Harnesses

Work and positioning harness, extremely light and comfortable.

Kong 911 - Aries

HANGING KIT FOR STRETCHERS | 911 ARMOR | 911 HIVE

Kong Hanging Kit For Everest Standard Version

Multiuse hanging kit made of two single pieces.

Kong MegaZip Pulley

Double pulley for long and fast zip lines (over 300 m).
Designed for use on 12 to 16 mm cables.
Large diameter steel pulleys and oversized bearings for longer life and smoother running.
Quick and intuitive cable insertion thanks to the innovative push&turn system, which at the same time requires a sequence of safety movements to disengage.
Equipped with supports for suspending the connectors to prevent wear caused by sliding on the metal cable, and rubber shock absorbers to cushion the end stop.
Certified according to the new standard for adventure parks EN 17109:20/B
High quality product fully developed and manufactured in Italy. Patented.

Kong Winch Adapter

Aluminum plate that allows the BigRig to be mounted on the Ortles Stand bases and on the Stelvio fishing pole, for the coupling with our AccessRig and LokRig winches

Kong Ciapin Evolution Fast

Webbing anchor with multiple attachment points, specifically conceived for use in helirescue activities.

Kong Caronte Crux

Hanging kit supplied with the Caronte net, which can be ordered separately as a spare.

Kong Hanging Gemini

AERIAL ROPEWAY SUSPENSION KIT

Kong Raizer Adapter 60mm

Stainless steel adapter for mounting the Raizer lifting system on 58>60mm diameter tubes/pipes. 

Kong Trimmer+2m Lanyard+Tango Blackk

NEW VERSION 10 MM ROPE | ADJUSTABLE WORK POSITIONING LANYARD

Brand new work positioning device enables quick and accurate adjustment of length for positioning at the work station. Super smooth adjustment even under load.

Kong Everest Taylan X-Tension

Kong Diapason Spacer For Harness

Heavy load spacer for work harnesses, designed for progression in confined spaces.
Fitted with a rigid structure to not interfere with the head.
Supplied with two connectors for attachment to the shoulder of harness.
In the CE context, the use of a safety sling connected between the suspension connector and the dorsal attachment of the harness is mandatory.
High quality product, made in Italy!

Kong Trimmer+2m Λανιέρα

NEW VERSION 10 MM ROPE | ADJUSTABLE WORK POSITIONING LANYARD

Kong Tech Finder Avalanche Probe

Probe for mountaineering and rescue for research of buried in avalanches.
Made of light aluminum alloy.

Kong Ciapin Evolution

 MULTI-ANCHOR STATIC WEBBING FOR HELIRESCUE

Kong Drill Adapter

Accessory designed to connect our winches (ORTLES, CEVEDALE) to a drill fitted with SDS-PLUS bajonet connection avoiding tiring manual operations.
N.B. Speed, capacity and lenghts of lifting depend on the power of drill and battery.

Kong Pamir Fast Pulley

Pulley with aluminum body and double stainless steel wheels. For use on ropes or steel cables of maximum diameter 13 mm.

Kong Pamir Fast Pulley

Pulley with aluminum body and double stainless steel wheels. For use on ropes or steel cables of maximum diameter 13 mm.

Kong Tree Fork 230cm Red