Gear Aid Seam Grip 7g Repair Kit

Gear Aid Seam Grip 7g Repair Kit

For Instant Repairs! The essential field repair kit for all types of repairs. Seam Grip® urethane rubber adhesive provides a clear, strong and flexible finish suitable for permanent waterproof repairs to holes, tears or leaking seams in most types of camping or outdoor equipment i.e. tents, marquees, awnings, ground sheets, backpacks, footwear, gloves, inflatable mattresses or toys, bladders, ski wear and other waterproof clothing, latex neck and wrist seals and kites etc.
Seam Grip® cures overnight or within two hours if used with McNett Cotol-240™ accelerator. 

Directions:

Preparation:
Clean/dry area to be repaired.
Roughen surfaces.

Holes and Tears: 
Create backing with removable tape.
Fill void and 6mm beyond. Keep repair level.
Remove tape after full cure (8-12 hours).

Patch Application:
Apply Seam Grip®, then apply patch over damaged area.
Wipe adhesive from edges.
Item may be used immediately.

High Wear Areas:
Apply thin layer of Seam Grip® to damaged areas.

Seams:
Apply Seam Grip® to inside of seam.
Use brush or apply thin film directly from tube.

Seam Grip® Dry Time:
Wait 8 to 12 hours.
Test before use.
Uncured Seam Grip® may bond to clothing or other items.
Patch Dry Time: In many cases, if patches are used on fabric, item may be used immediately.
Check patches peroidically. Reaches full strength in 24 hours. For best adhesion, apply heat from hair dryer at low setting for 2 to 3 minutes.